Products

Bioruptor® in Action Video

Product information

Brochures, posters, application notes,
protocols, ...

News

Cell-O-Matic, an exciting program about single cell genomics

Diagenode is proud to be part of this consortium that will aim at developing chip-based technologies that process DNA from individual cells, ready...

Comparison of commercially available MeDIP kits

“…We observed that the MagMeDIP kit (Diagenode) had the highest yield…and the DNA was successfully enriched from a 1:4 to 10:1 ratio…”

H3K27me3 and H3K4me3

Subscribe to our newsletter:

Bioruptor® Water cooler – including continuous valve for Bioruptor®

Back to listing

Description

This water cooling system allows for continous cooling of the Bioruptor® waterbath. An additional regulating valve (Valve kit) ensures that water will only be replaced during the off cycle to avoid any interference between water flow and the sonication process.

BioAcc-cool

1 unit

3900 $

Characteristics
Applications
Data sheets
Related products

Reservoir Capacity: 6 Liters
Temperature Range: -20 to 200°C
Temperature Stability: ± 0.01°C
Controller / RS232: Advanced Digital/Yes
Readout: Graphic LCD
Readout Accuracy: +/- 0.25°C
Temperature Readout: C or F
Pump Type: Pressure/Suction
Pressure Flow Rate: User-adjustable; 30 (60Hz), 22 (50Hz) lpm max.
Suction Flow Rate: User-adjustable; 22 (60Hz), 15 (50Hz) lpm max.
Pump Inlet and Outlet: 1/4 in. FPT Rear Discharge
Cooling Capacity at 20°C: 200 Watts
Cooling Capacity at 0°C: 140 Watts
Cooling Capacity at -10°C: 100 Watts
Over-Temperature Cutoff: Adjustable
Low-Liquid Cutoff: Yes
Heater: 1100 Watts
Input Voltage: 120 / 240 Volts
Input Current: 12 Amps
Input Frequency: 60 hz
Working Access (L x W x D): 5 1/2 x 5 1/4 x 5 1/2 inches / 13.97 x 13.21 x 13.97 cm
Overall Dimensions (L x W x D): 15 3/4 x 8 1/4 x 22 1/2 inches / 40 x 20.1 x 57.15 cm
Shipping Weight: 70 lbs (31.75 kg)